Regulating Your Home’s Water Pressure

Do you know how high the water pressure in your home is? Do you know what the recommended amount is? 9 out of 10 homeowners do not know that their water pressure is higher than the recommended amount. What’s worse, most homeowners don’t even know that having high water pressure is a bad thing for their home.

High Water Pressure GaugeIf your water pressure is too high, you could be causing serious damage to your plumbing and costing yourself thousands. High water pressure can:

  • Burst water lines or cause leaks.
  • Weaken water heaters and cause them to leak or fail completely (if leaking, replace immediately).
  • Overwhelm expansion tanks and cause water hammers (the thud you hear when you turn your hot water on).
  • Overwhelm and/or break valves in dishwashers and refrigerators.
  • Overwhelm and/or break water filters/softeners.

To ensure that you avoid these potential problems, you have to regulate the water pressure in your home. That’s where a water pressure regulator comes in to play. The water pressure regulator, though, needs to be set correctly and needs to be repaired or replaced when broke – many people will go years with a faulty regulator, causing damage and wasting water.

Avoiding High Water Pressure with a Water Pressure Regulator

Water pressure regulatorA pressure regulator in your home can ensure that the pressure coming from the municipal supply is reduced to a safe pressure that won’t damage your plumbing. To protect the supply line to your home and any irrigation system you may have, the regulator should be placed at the meter instead of just at the entrance of the building. If you do have an irrigation system, this would also help prevent misting which increases the efficiency of the irrigation system and save you water and money.

Unfortunately, water pressure regulators – like any mechanical device – don’t last forever. If you have noticed any of the issues listed above and you already have a pressure regulator, you will want to test the water pressure to see if the regulator is operating properly. In many cases, if you haven’t replaced or tested the pressure regulator in several years, it may need to be repaired or replaced.

Testing the Water Pressure in Your Home

You should test your water pressure on a regular basis to avoid any problems with your plumbing which could result in costly repairs – test monthly or when you notice changes in the pressure. In some cases, the water pressure may fluctuate simply because of higher demand for water in your home or neighborhood during busier times of day.

Testing your water pressure is as simple as checking the water pressure gauge. Your water pressure should read between 45PSI and 65PSI but can go as low as 40PSI and as high as 70PSI without you having to panic.

If you do not have a pressure gauge you can simply purchase one from a home improvement or hardware store for about $20 or less. Then, attach the gauge to an outdoor or indoor faucet and turn on the water. The gauge will then read the pressure of the water. It is advised to test the pressure on several different faucets to ensure you’re getting the same reading across all areas of your home and to get an accurate reading.

If your water pressure is too high or too low, you may need to repair your water pressure regulator. For assistance with repairs or replacement in the Phoenix metro area, contact Peace of Mind Plumbing.

Bookmark the permalink.

Comments are closed